How to check the quality of sbs modified bitumen equipment?

After using sbs modified bitumen equipment for a period of time, there will always be various problems. So, how to check whether the sbs modified bitumen equipment is qualified?

Analyze the problem of modifiers. In general, the amount of modifier should be in place, and the pH value should be adjusted according to the different water quality when adding.

Because ordinary bitumen also has different classifications, when producing modified bitumen, pay attention to whether the raw materials used are ordinary bitumen and the quality is guaranteed.

Check the sbs modified bitumen equipment. If the gap of the emulsified bitumen colloid mill of the emulsifier used for a long time will become larger, it needs to be adjusted to continue the production.

A 10m high temperature-conducting bucket is not set on two juxtaposed expansion tanks, which is superior to the temperature-conducting buckets. It creates a negative pressure on the hot air in the tank, so that most of the high-temperature gas is discharged from the tank by the cylinder. The temperature of the guide part is reduced, so that the guide part is cloth-coated with the modifier material.

After the operation of the sbs modified bitumen equipment, the temperature in the swell tank is above 180 degrees Celsius, and it is easy for the modifier to adhere to the blanking groove on the upper part of the spiral feeding device, which will cause the accumulated modifier to fall off smoothly. Regular management and maintenance of sbs modified bitumen equipment is required.