RU
MM
AR
How should the asphalt concrete mixing plant be maintained?
The concrete batching plant at the construction site is a frequently-prone equipment that is prone to failure. Strengthening the maintenance of this equipment has an important role in ensuring the safe construction of the construction site, improving the equipment integrity rate, reducing equipment failures, and ensuring the quality of concrete. Usually, the maintenance of the mixing plant is divided into the maintenance of the tank, the maintenance and adjustment of the hoisting system, the adjustment and maintenance of the stroke limiter, the maintenance of the wire rope and the pulley, the maintenance of the hoisting hopper, the maintenance of the track and the track support, etc. . The tank body is the working device of the concrete mixing plant, and the wear is the most serious. Generally, the lining plate, the blade, the mixing arm and the material door seal should be adjusted and replaced frequently according to the wear condition. After each concrete mixing, the tank body must be flushed in time, and the remaining concrete in the tank and the concrete adhering to the material door must be thoroughly rinsed to prevent the concrete in the tank from solidifying. The flexibility of the opening and closing of the material door should be checked frequently to prevent the material door from being stuck.
If there is abnormal braking when the hopper is lifted or lowered, first move the lock nut back to the proper position, and then tighten the hexagon socket head bolt at the end clockwise. Back to the proper position, then loosen the inner hexagon bolt at the end, lengthen the distance of the inner brake, and then tighten the lock nut. Maintenance of the feeding rack and support: Always apply grease in and outside the groove where the feeding frame and the roller are in contact to reduce the running resistance of the roller when going up and down. The deformation of the feeding rack and the support should be dealt with in time to prevent Accident happens. Maintenance of travel limiter: The limiter of the mixing station is divided into limit limit, upper limit, lower limit and circuit breaker. It is necessary to regularly check the sensitivity and reliability of each limit switch, check whether the components, joints and wiring of each control circuit are in good condition, and whether the circuit is normal, which is of great importance to the safe operation of the mixing station.
Doing a good job in the quality control and troubleshooting of the mixing station can not only ensure the quality of the project, but also reduce the cost of the project, improve the construction efficiency, and achieve a double harvest of social and economic benefits.
