Six Problems Prone to Occur in the Cement Silos of Concrete Mixing Plants

A cement silo is a closed storage tank used to store bulk powder and plays an important role in a concrete mixing plant.

Today, here I will introduce: six problems that easily occur in the cement warehouse of the concrete mixing plant. We should do prevention in advance.

1. Deformation of the leg

The legs are used to support the entire cement warehouse. The most afraid of deformation is deformation. Once the deformation is difficult to support the entire cement warehouse, the manufacturer will make the legs very firmly in production. The user should also avoid collision with other objects. Prevents leg deformation problems.

2. Surface corrosion and paint removal

Because the cement warehouse is exposed to the air, the surface is easily corroded, and lacquerware appears. It takes a long time without large-scale painting work, and the problem of surface corrosion paint is prone to occur.

3. Ash emission problem of the top dust collector

When conveying bulk materials to the cement silo, the role of the dust collector is to remove dust generated during the transportation. If there is a problem with the filter element on the top of the silo or if it is not cleaned for a long time, it will not be able to play a normal role in dust removal, which will cause ash emission problems on the top of the cement silo. Therefore, the user must regularly check the filter element of the dust collector on the top of the silo. And often clean it.

4. Arch of bulk materials under water

When cement silos store bulk materials, they are not tightly sealed and can easily form moisture in the bulk materials, which can cause arch problems in cement silos. Once arch problems occur, the arch breaking device must be activated to destroy the arch.

5. The problem that the dust collector cannot remove dust

Adopting the top dust remover to remove the dust in the cement silo can help the cement silo solve a large number of failures. If the filter element of the dust collector at the top of the silo has a problem or is not cleaned for a long time, the dust cannot be removed, which may even cause the problem of dust removal at the top of the silo. The key to solving the problem that the dust collector cannot remove dust is to clean the dust collector to ensure that the filter element is in good condition.

6. Material level gauge failure

When the material level gauge is used to accurately measure the material position in the cement silo, the higher the sensitivity of the material level gauge, the better the user can understand the condition of the material in the cement silo. However, once the electronic components fail, the level gauge will fail.