Main Features of Bitumen Emulsion Plant

Features of Sinoroader Bitumen Emulsion Plant

1. Fully automated computer-controlled production: The computer sets the oil-water ratio, the output per unit time, the control parameters, alarm parameters, and sensor correction values, and the set values are not lost for a long time. One-key start-up, fool-type production mode, the equipment runs automatically according to the set program. Touch screen man-machine dialogue interface, comprehensive monitoring equipment operating status, real-time monitoring of the temperature, liquid level, flow rate and proportion of each department, touch screen controls the start and stop of valves, pumps and adjustment of flow and speed. Manual backup is provided for emergency production in the event of an automatic system failure.

2. The content sets the proportional bandwidth, which can be adjusted at any time within the range of 10% -70%.

3. The proportioning control is accurate, and the error of the finished product content is less than 1%.

4. High-quality colloid mill, multi-layer grinding and shearing, the fineness of the finished product can reach 1-5 microns, and the service life is long.

5. The parts in contact with the emulsion are made of highly corrosion-resistant materials, which can adapt to the production of emulsified asphalt with various PH values and are durable.

6. Equipped with high-efficiency heat exchanger, the content> 50% only needs to heat the first tank of water, and the subsequent production water is completely heated by the heat exchanger.

7. Any place in the world can be controlled remotely through the network